|
RLR07C1742FS Features:
|
| The equations are developed to predict the time it takes the RC circuits to discharge to the threshold switching voltage of the inverter. The threshold voltage of the inverters will be assumed to be oneChalf the supply voltage, which is equal to the average of the HighCLevelCInput Voltage (VIH) and the LowCLevel Input Voltage (VIL). The NL27WZ04 specifies VIH as 0.7 VCC (minimum) and VIL as 0.3 VCC (maximum). In addition, the initial voltage or the output High voltage (VOH) of the inverter is assumed to be equal to VCC. The actual VOH value is a function of the output current and decreases as the output current increases. The general equation for a RC circuit discharging to a logic switching threshold voltage (Vth) with an initial voltage (Vi) is as follows. |
|
RLR07C1742FS (Absolute) Maximum Ratings:
|
| The ADPCM serial input register is a 5-bit shift register to store the 5-bit data in the 40 kbps ADPCM mode. Serial input data is latched in with the falling edges of ASCK while CE is high and TRB is low. A minimum number of five low going ASCK pulses must be available within the CE pulse when operating in the 40 kbps mode. For the 32, 24 and 16 kbps modes, ASCK must be pulsed low 4 times while CE is high to read in the RSI data. The falling edge of CE latches the last 5 bits data in the 40 kbps mode or the last 4 bits data in the 32, 24, and 16 kbps modes prior to the CE transistion. See Table 3 for the position of the ADPCM data in the 5-bit input register when 5 ASCK low going pulses occur while CE is high and TRB is low. Bit 1 in Table 3 is the LSB which is the last bit in 32 and 40 kbps modes referenced to the negative edge of CE. |
|
RLR07C1742FS Pinout:
|
| In a typical standalone VoIP phone, one DSP handles the voice processing functions (voice compression, acoustic echo cancellation, etc.), while the other one deals with the telephony functions (dialing, line echo cancellation, callerID detection, high-speed modem, etc.). In such an application, the power of the ARM7TDMI allows it to run the VoIP protocol stack as well as all the system control tasks. |
| The ADP3181 also includes programmable no-load offset and slope functions to adjust the output voltage as a function of the load current so that it is always optimally positioned for a system transient. The ADP3181 provides accurate and reliable short-circuit protection, adjustable current limiting, and a delayed power good output that accommodates on-the-fly output voltage changes requested by the CPU. |
