|
RLR07C1500FSB14 Features:
|
| The RLR07C1500FSB14 is 33,554,432 bits synchronous high data rate Dynamic RAM organized as 2 x 524,288 words by 32 bits, fabricated with SAMSUNGs high performance CMOS technol- ogy. Synchronous design allows precise cycle control with the use of system clock. I/O transactions are possible on every clock cycle. Range of operating frequencies, programmable burst length, and programmable latencies allows the same device to be useful for a variety of high bandwidth, high perfor- mance memory system applications. 8 columns block write improves performance in graphics sys- tems. |
|
RLR07C1500FSB14 (Absolute) Maximum Ratings:
|
| In interrupt mode exceeding TOS also makes O.S. active but O.S. will remain active indefinitely until reset by reading any register via the SMBus inter- face. Once O.S. has been activated by crossing TOS, then reset, it can activated again only by Tempera- ture going below THYST. Again, it will remain active indefinitely until being reset by a read. Placing the RLR07C1500FSB14 in shutdown mode also resets the O.S. output. |
|
RLR07C1500FSB14 Pinout:
|
| ICS reserves the right to make changes in the preliminary device data identified in this publication without notice. ICS advises its customers to obtain the latest version of all device data to verify that information being relied upon is current and accurate. |
| All inputs to the 626162 SDRAM are latched on the rising edge of the system (synchronous) clock. The outputs, DQ0C DQ15, also are referenced to the rising edge of CLK. The 626162 has two banks that are accessed independently. A bank must be activated before it can be accessed (read from or written to). Refresh cycles refresh both banks alternately. |
| The Advance Information designation indicates that Spansion LLC is developing one or more specific products, but has not committed any design to production. Information presented in a document with this designation is likely to change, and in some cases, development on the product may discon- tinue. Spansion LLC therefore places the following conditions upon Advance Information content: |
