LA4705N Selling Leads,LA4705N Datasheet ,LA4705N PDF -TheICStock
HOME | Send inquiry | Site Map | CONTACT US

LA4705N  Selling Leads ,LA4705N Datasheet

Search: : Suppliers Datasheet
Home >> Map >> >> 853
LA4705N   Features:
intital value; the dissipation factor shall meet the initialrequirements; the leakage current shall not be morethan the original requirements. Reflow Soldering: It is recommended that these capacitors be reflow soldered at a temperature of not greater than + 250'C for a period of not more than 30seconds. Marking: The small body area of these capacitorsdoes not permit elaborate marking schemes. Required information will be distinctly marked on thecarton or packages in which the units are shipped.Capacitors may be ordered with color coding atadditional cost. Color coding shall be as mutuallyagreed upon by Vishay Sprague~ and the customer. Polarity: The anode terminal of each capacitor isidentified by the weld and dimple projection on theanode cap (see Dimensional Configurations).
LA4705N   (Absolute) Maximum Ratings:
The overflow output of the lower device now becomes thefifth bit. When it goes high, all counts must come from theupper device. When it goes low, all counts must come fromthe lower device. This is done simply by connecting thelower overflow signal to the CEl control of the lower A/Dconverter and the CE2 control of the upper A/D converter.The three-state outputs of the two devices (bits l through 4)are now connected in parallel to complete the circuitry.
LA4705N   Pinout:
C4532 (EIA:CC1812) TYPECAPACITANCE RANGES:CLASSl (TEMPERATURE COMPENSATION)TEMPERATURE CHARACTERISTICS: COG(0+30ppm/oC)RATED VOLTAGE Edc: 630V
RELATIVE This mode is used for the JP instruction, the instruction fieldis added to the program counter to get the new programlocation. JP has a range of from -31 to +32 to allow a onebyte relative jump (JP + 1 is implemented by a NOP instruc-tion). There are no "pages" when using JP, all 15 bits of PCare used.
SLAVE MICROWIRE/PLUS OPERATION In the MICROWIRE/PLUS Slave mode of operation the SKclock is generated by an external source. Setting the MSELbit in the CNTRL register enables the SO and SK functionsonto the G Port. The SK pin must be selected as an inputand the SO pin is selected as an output pin by appropriatelysetting up the Port G configuration register. Table 4 summa-rizes the settings required to enter the Slave mode of opera-tion.

V ((={ v l SA(i,
1
Variable - t
l Vs
|
vl7

sd-Iai}!raIoRO-o-aptoiaAUOPaPPV

Send inquiry/send message

Requirements:
Part Number * Qty * Mfg Pack D/C
Description:
Email Address: *
Company Type: * Purchaser Trader
Name: *
Mr. Ms.
Company: *
Country: *
Telephone:*
Country Code Area Code (if any) Telephone Number
- -
MSN:

LA4705N  DataSheet

Partno Description Maker View
LA4705N 15W 2-CHANNEL BTL AF POWER AMPLIFIER FOR CAR STEREOS(258.00 k)  
LA4705N Keywords:
  LA4705N Supplier,   LA4705N Trading
LA4705N,You can find the information about LA4705N, including LA4705N Selling Leads and LA4705N datasheet
  74HCT148M     ICS1522M     742T     IRGPC50F     LA4282     BU9534KV     AD535JD     74LVC00AD118     2SA1682